Industrial Valve

Product Details:

Manufactured as per BS EN ISO 17292. These valves are of three piece design. The end connection is socket weld. The body is made of carbon steel and the ball is made of Hastelloy “C” / Monel 400. The stem is bottom entry, providing maximum safety. This design ensures that stem blow-out does not take place, safe guarding personnel working in its vicinity and preventing chlorine gas from leaking out. 

Product Details:

Backed by huge industry experience and market understanding, we are involved in offering a wide array of This Machine for our valued patrons.

Product Details:

Identifying Features The design is metal seated, key operated, single spindle compression packed valve using packings to make a seal around the valve spindle & body. To ensure a good seal, the gland nut is tightened to compress the packing against the spindle. As this results in higher torques, the valve is required to be operated with a wrench. The design allows for tightening of the gland nut in case of leakage past the packings. The valve design is suitable for Chlorine & other corrosive gases because of the ability of the operating mechanism to withstand higher torques to overcome any build-up of salts or contaminants in the seating area. Due to particulate generation from valve seat & packing wear, it is not recommended to use the valve for high purity applications. Recommended Opening Procedure The following sequence should be followed: 1. Connect the cylinder to the system 2. Ensure gland nut is tight 3. Place the wrench on the spindle square & slap the valve open in anti-clockwise direction by striking the wrench with the gloved palm of the hand. Use twisted wrench having a 9.5 mm square & an open-end wrench on the opposite end to tighten the gland nut (see page No. 7 for details) 4. Continue opening the valve until it is 1 turn open. A new valve requires approximately 2 turns from full open to full close. It is recommended to open the valve up to 1 turn in service by turning the spindle in anti-clockwise direction. This also helps in the case of an emergency to quickly close the valve and helps protect upper section of the valve body threads. As the threads are in the wetted gas stream, the threads can become jammed with corrosion by-products. If the valve is opened to the recommended 1 turn & the threads become jammed, the upper threads usually remain clear. This allows the operator to further open the valve & to free the threads.  

Additional Information:

• Delivery Time: 1 week

Product Details:

SHITAL ENTERPRISES  offers a variety of inline check valves for vacuum systems feeding chlorine, sulfur dioxide, ammonia and liquid chemical.  Several designs are available to suit a wide range of applications. 

Additional Information:

• Item Code: 8421
• Delivery Time: 1 week

Product Details:

Auxillary Container Valve An additional valve assembly mounted with a yoke on the container valve to keep the container valve damage free. It eliminates the possibility of leakage from the damaged container valve.